Pole saws are essential for anyone who needs to prune trees or cut branches at height. When used correctly and regularly maintained, they can be a great asset in keeping your garden looking well-groomed.

However, if your pole saw’s blade is not often sharpened, it will become blunt, making it difficult to cut through branches quickly and efficiently.

In this article, there is everything you need to know about how to sharpen pole saw blades – from the tools required, step-by-step instructions on how to do it yourself, when sharpening might not be feasible, and it’s better to get a new blade.

We will also discuss when it is worth getting saw blades sharpened and how to sharpen loppers with sandpaper.

Can you Sharpen Tree Pruner Blades?

You can sharpen tree pruner blades using a grinder or file. It is important to ensure the blade is properly secured before sharpening it. Be sure to use protective gear such as goggles and a mask, as small particles may be released during the sharpening process.

Also, check that the blade edges are even and not too sharp, as this can cause injury. Sharpening your tree pruner blade will extend its life and maintain a smoother cutting experience.

Related Article: Best Silky folding saws for Camping, Backpacking and Bushcraft

How do you Sharpen a Saw Blade at Home?

Sharpening saw blades at home can be done with some basic tools that most households have. Start by securing the blade in a vice, ensuring it is level with the vice so you can sharpen it evenly.

You will need a flat file or diamond stone sharpener to sharpen the blades. Hold either tool at a 30-degree angle against the blade and start filing away from yourself in a back-and-forth motion.

Sharpen the two sides equally and keep them even so the edge isn’t too sharp or dull on the other.

How To Sharpen a Dull Saw Blade?

To sharpen a dull saw blade, you will need to use a file or grinder to remove the dulled metal and expose the fresh steel underneath. Dull saw blades require more effort to sharpen them than when the blade is still sharp, as you will need to remove more rust from the blade.

Make sure you wear protective gear and use a smoother file or grinder to ease the process. Carefully, file away from yourself in a back-and-forth motion until both sides of the blade have been filed evenly.

How do you Sharpen a Stihl Pole Pruner?

Sharpening a Stihl pole pruner requires the same process as sharpening any other saw blade. There, you first secure the edge on a clump or in a vice. You must use a file or stone sharpener to remove the dulled metal from the blade.

Start at a 30-degree angle and file away from yourself. Sharpen both sides of the blade evenly until all burrs have been removed. You can use a smaller file or sharpening stone to give the blade an even sharper finish while eliminating any burrs left on the blade.

How do you Sharpen Pruner Blades?

While sharpening pruner blades may look intimidating, it is a simple process that you can do at home. Begin by securing the blade in a vice, ensuring it is level with the vice so you can sharpen it evenly.

You will need a file or diamond stone sharpening tool to sharpen the blades. Hold either tool at a 30-degree angle against the blade and start filing away from yourself in a back-and-forth motion. In the end, you can use a honing stone or file to give the blade a perfect look.

How do you Sharpen Pruners by Hand?

Sharpening pruners by hand is possible and does not require any special tools. Firstly, you should lay the pruner flat, like a table. Using the same 30-degree angle technique discussed above, sharpen the blade by filing away from yourself in a back-and-forth motion.

For optimal sharpness, remember to sharpen both sides of the blade evenly. If your blade is too dull, you can use a knife-sharpening stone to refine the edge.

Is It Worth Getting Saw Blades Sharpened?

Getting your saw blades sharpened is worth it, as this will help extend the blade’s life and keep a smoother cutting experience. A well-sharpened blade can last longer, thus saving you money in the long run.

Moreover, a sharp blade will make your job easier as it requires less effort to cut through the material. However, when sharpening blades at home, wear protective gear such as goggles and gloves to avoid accidents.

If you don’t feel comfortable sharpening it yourself, professional services can help sharpen your saw blade.

Can you Sharpen Loppers with Sandpaper?

Using sandpaper is not the best way to sharpen loppers, even if it may seem like an easy solution. The coarse texture of sandpaper will not be able to sharpen the blade as effectively as a sharpening stone or file.

Additionally, sandpaper can leave tiny burrs on the blade, dulling it even more. If you want sandpaper, use it after sharpening your lopper with a honing stone or file for best results.

Things you might need…

Check out the full range of Pole Saw Sharpeners on Amazon

Conclusion

Sharpening a pole saw blade is not as difficult as it may seem, and following the steps above will help you get too sharp in no time. Safety must always be at the forefront when sharpening any saw blade.

Always wear protective gear and use the sharpening tools correctly. Additionally, if you feel uncomfortable sharpening the blades, professional services can help you sharpen your saw blade.

Following these steps will help guarantee a longer life for your pole saw blade and improve its performance.